Solderless Custom RCA Cable System Connectors – Silver – Pair

Solderless RCA Connector – A part of our Solderless Custom RCA System.

Note: Our Solderless RCA Connectors are only to be used with our Solderless RCA Cable.

Sold in pairs. Minimum of 5 pairs per order

This Solderless RCA Connector and its entire family of options are to be used with our Solderless RCA Cable, and is exactly what we have been using at Vanguard Automotive Design for some time now. Your cables can be made in less than 30 seconds. No need to break out the solder station, magnifying glass, and helping hands and spending 10 minutes just to strip a few small wires and solder on two RCA ends, let alone a Y-Adapter. This system is as easy as it comes. 

The cable is a standard 75-ohm coaxial cable, but still has plenty of flexibility to use in automotive installations. They look clean and sleek and are not stiff and bulky like most high-end cables are. The cable comes as a side-by-side pair design, so just like normal RCA’s, they act as a pair. That said, they are easy to split if you are doing custom wiring work.

Also Available For Our Solderless RCA Cable System:

Solderless RCA Cable

Black Chrome RCA Connector Ends

Silver RCA Connector Ends

RCA Y-Splitters

Right Angle RCA Connector Ends

Female RCA Connector Ends

Solderless RCA Connector Specs 

Nickel Plated Contacts (Silver)

Single-Piece Design

Small-Format

Accepts Our Specific 75-Ohm Coaxial Cable

SOLD IN PAIRS. An order of “5” quantity means you will receive ten ends. 5 red, and 5 white.

Note from ResoNix owner, Nick Apicella..

We have been using these RCA’s exclusively at Apicella Auto Sound in every sound system we have installed since early 2022. To date we have not had a single failure, and any issues of induced noise from our previous RCA cable of choice, while not often, seemed to completely disappear. We have used these with many DSP’s and amplifiers from Helix, Match, Brax, and Mosconi.