Original price was: $2.35.$1.90Current price is: $1.90.
Want clean and neat custom RCA cables that are the perfect length, but hate how time consuming and tedious they are? Our Solderless RCA Cable with the Solderless RCA Ends are your answer. Not only are they super easy to use, have excellent noise rejection, and look great, but they also come out to be less in price than other popular car-audio RCA’s when outfitting a whole vehicles installation.
Made In America.
Sold By The Foot
The entire Solderless Custom Length RCA Cable System can be configured here as well.
| Quantity | Discount Type | Discount | Price Per Item |
|---|---|---|---|
| 100-2000 | Percentage | 10 | $1.71 |
Our Solderless Custom RCA Cable System is exactly what we have been using at ResoNix Sound Solutions for some time now. These allow you to cut your RCA cables to size, and install the RCA ends easily by simply cutting the cable, adding the head to the end, and screwing down a small flat-head set screw. Your cables can be made in less than 30 seconds. No need to break out the solder station, magnifying glass, and helping-hands and spending 10 minutes just to strip a few small wires and solder on two RCA ends. This system is as easy as it comes.Â
    The custom RCA cable is standard 75-ohm coaxial cable, but still has plenty of flexibility to use in automotive installations. They look clean and sleek and are not stiff and bulky like most high-end cables are. The cable comes as a side-by side pair design, so just like normal RCA’s, they act as a pair. That said, they are easy to split if you are doing custom wiring work.
Our Solderless Custom RCA Cable System is exactly what we have been using at ResoNix Sound Solutions for some time now. These allow you to cut your RCA cables to size, and install the RCA ends easily by simply cutting the cable, adding the head to the end, and screwing down a small flat-head set screw. Your cables can be made in less than 30 seconds. No need to break out the solder station, magnifying glass, and helping-hands and spending 10 minutes just to strip a few small wires and solder on two RCA ends. This system is as easy as it comes.Â
    The custom RCA cable is standard 75-ohm coaxial cable, but still has plenty of flexibility to use in automotive installations. They look clean and sleek and are not stiff and bulky like most high-end cables are. The cable comes as a side-by side pair design, so just like normal RCA’s, they act as a pair. That said, they are easy to split if you are doing custom wiring work.
We have been using these RCA’s exclusively at ResoNix Sound Solutions in every sound system we have installed since early 2022. To date there has had not a single failure, and any issues of induced noise from our previous RCA cable of choice, while not often, seemed to completely disappear. We have used these with many DSP’s and amplifiers from Helix, Match, Brax, Mosconi, and more.
. Made in USA
. Side-by-Side design acts as a PAIR of channelsÂ
. TPE Jacket
. Max Bend Radius 2.25 inches
. Sweep-tested 3GHz over 100ft with nominal db loss
. Nominal Capacitance 18.2 pF/ft / Premium oxygen-free copper
. 100% shielding with 95% tinned copper braid & tin foil shield
. CM & CL2 rated for in-wall installations
. Nitrogen-gas-injected foam PE dielectric
. Max Pulling Tension 2359 PSI
. Max Bend Radius 2.25 inches
Also Available For Our Solderless RCA Cable System:Â
ResoNix Sound Solutions is a company with a specialty in high-end car audio and automotive sound treatment that offers top quality products and services that provide superior performance in their respective categories. No gimmicks, no baseless claims, no nonsense. Constrained layer dampers, sound absorbers, decouplers, noise barriers, and car audio DSP tuning and consultation services are part of our line-up with a focus on data-backed, solutions-based products developed by professional enthusiasts, for enthusiasts.
