$210.00
Available on backorder
| Quantity | Discount Type | Discount | Price Per Item |
|---|---|---|---|
| 2 | Percentage | 5 | $199.50 |
| 3-5 | Percentage | 10 | $189.00 |
| 5-10 | Percentage | 15 | $178.50 |
ResoNix Super Max Mega Pro CLD Squares are a constrained layer damper sound deadener product comprised of butyl rubber and aluminum. It is adhered to panels of the car to lower structure-borne vibration and resonance for a lower noise floor and a better foundation to build a sound system off of. What makes it different from our standard ResoNix CLD Squares is the thickness of the aluminum constraining layer. On the original CLD Squares it is 4-mil thick. On our Super Mega Max Pro CLD Squares, we tripled it and stepped it up to 12-mil thick. A stronger and stiffer constraining layer means better damping performance. The SAE J1637 test results show the differences between the original ResoNix CLD Squares, and the Mega CLD Squares. The Mega CLD Squares have a slightly higher Composite Loss Factor than the original CLD Squares, but it also has a MUCH wider bell curve on the Composite Loss Factor Scale. This means much higher performance at higher temperatures, which is always the struggle in the automotive environment.
Our ResoNix CLD Squares can be used to treat resonance and vibration in many different applications. It is most commonly used on the following…
Door Skins – Door Panels – Trunk Lids – Hatches – Rear Decks – Rear Deck Cover Panels – Roof Skins – Wheel Wells – Wheel Liners – and More!
Made in the USA – Category Leading Adhesion – Will Last Longer Than Your Vehicle – Category Leading Thermal Rating – Results Blow The Competitors Out Of The Water 🙂
What makes our products better than the rest? Click here for a detailed run down on why ResoNix is the best option.
USA Manufactured
Guaranteed The Highest Performance Out Of Any CLD-Style Automotive Sound Deadening Product On The Market And We Have The Data To Back It.
Click Here to see the Independent Test Results, and Click Here to read more about the SAE J1637 testing.
We get emails regarding this often. The problem is, every application and situation is different. Every panel is different, every car is different, and everyone’s end goals are different. With our Reference Information & Guide section, we try to give you as much information as possible in order to help you make the most informed decision possible. But to make it very quick and simple, in our shop, we almost never do less than 60% coverage on panels that require treatment. This includes door skins and panels, rear decks, roofs, quarter panels, trunks, interior plastic trim, and more. In cases where we are just trying to achieve the best end result possible, we aim for nearly 100% coverage. We figure if we are doing it, we may as well do it once and do it right.
A Constrained Layer Damper works by using a viscoelastic layer (the butyl) and a constraining layer (the aluminum) to convert mechanical energy (the vibration of a panel) into heat via the viscoelastic properties of butyl while the constraining layer helps the panel keep its shape and resist deformation. The primary way that CLD achieves this is through shear forces in the butyl layer caused by being constrained between the panel and the constraining layer while the panel is vibrating (bending). When the panel flexes and deforms, the viscoelastic layer naturally resists and wants to “snap” back into place. See Figure 1. (Click to expand)
Figure 1.
ResoNix CLD Squares should be used where you want to cut down on any structure-borne vibration and resonance. Long, flat, and thin panels, like outer door skins, door panels, quarter panels, and roof skins are the biggest offenders. Reducing structure-borne vibration helps lower the overall noise floor of the vehicle while also lowering the resonance caused by sound systems to an acceptable level. This can result in a faster decay of bass and midbass frequencies. Slow decay in these frequencies can cause “muddy” sounding bass response or can make it seem like repeated fast bass notes are blending together. See figure 2. (Click to expand)
ResoNix CLD Squares are the best choice for all applications where you want to attack structure-borne vibration to reduce undesirable resonance and vibrations. We chose a butyl compound specifically designed for vibration damping and paired it to an aluminum layer thickness that is as stiff as possible, without risking weakening the adhesive bond on contoured panels.
Our detailed how-to guides on how to get the most out of our products can be found in our Reference Information & Guide section. In the meantime, please properly clean the surface of all dirt, grease, and oils before application, and use a roller to properly adhere the CLD Squares to your panel. No heat is necessary.
USA Manufactured
ResoNix is an automotive sound treatment company that offers top quality products which provide superior performance in their respective categories. No gimmicks, no baseless claims, no nonsense. Constrained layer dampers, sound absorbers, decouplers, and noise barriers are part of our soon to be released line-up with a focus on data-backed, solutions-based
products developed by enthusiasts, for enthusiasts.
50 Holt Drive, Unit 4
Stony Point, NY 10980
info@resonixsoundsolutions.com
(845) 274-4357
50 Holt Drive, Unit 4
Stony Point, NY 10980
info@resonixsoundsolutions.com
(845) 274-4357
