ResoNix Sound Solutions CLD Rectangles Sound Deadener sound deadening

ResoNix LITE – CLD Rectangles – Lightweight Sound Deadener – 9 Pieces (36 Square Feet)

$140.00

In stock (can be backordered)

Quantity	Discount Type	Discount	Price Per Item
2	Percentage	10	$126.00
3-5	Percentage	15	$119.00
6-10	Percentage	20	$112.00

PREORDER! ETA: Late August 2023

ResoNix Lite – CLD Rectangles – Lightweight Sound Deadener

9 Pieces – 36 Square Feet

Please note, our CLD Rectangles do NOT have the same performance level as our CLD Squares. They are a thinner product that competes closer in performance and price with other well known brands products on the sound deadener market. See specs below.

ResoNix CLD Rectangles is a lightweight sound deadener (constrained layer damper) product comprised of butyl rubber and aluminum. It adheres to panels of the car to lower structure-borne vibration and resonance for a lower noise floor and a better foundation to build a sound system off of. ResoNix Squares is our more price-friendly CLD product that competes in a similar price and performance range as other products on the market. Its focus is on applications that need lightweight sound deadener, and applications that are budget-restricted.

Our ResoNix CLD Rectangles can be used to treat resonance and vibration in many different applications. It is most commonly used on the following…

Door Skins – Door Panels – Trunk Lids – Hatches – Rear Decks – Rear Deck Cover Panels – Roof Skins – Wheel Wells – Wheel Liners – and More!

Made in the USA – Category Leading Adhesion – Will Last Longer Than Your Vehicle – Category Leading Thermal Rating – Results Blow The Competitors Out Of The Water 🙂

What makes our products better than the rest? Click here for a detailed run down on why ResoNix is the best option.

Specifications

18” x 32”
9 Pieces – 36 Square Feet Total
45 mil thick butyl layer
3 mil thick aluminum layer
0.45 pound per square foot
For enthusiasts, by enthusiasts

USA Manufactured

ResoNix CLD Rectangles is our price-friendly Lightweight Sound Deadener product. For the highest performing CLD sound deadeners on the market, look into our ResoNix CLD Squares, and ResoNix Super Max Mega Pro CLD Squares.

Click Here to see the Independent Test Results, and Click Here to read more about the SAE J1637 testing.

Recommended Amount Of ResoNix CLD Rectangles Lightweight Sound Deadener

We get emails regarding this often. The problem is, every application and situation is different. Every panel is different, every car is different, and everyone’s end goals are different. With our Reference Information & Guide section, and our ResoNix Sound Deadener Buyers Guide, we try to give you as much information as possible in order to help you make the most informed decision possible. But to make it very quick and simple, in our shop, we almost never do less than 60% coverage on panels that require treatment. This includes door skins and panels, rear decks, roofs, quarter panels, trunks, interior plastic trim, and more. In cases where we are just trying to achieve the best end result possible, we aim for nearly 100% coverage. We figure if we are doing it, we may as well do it once and do it right.

An excerpt from our sound deadener Reference Information & Guide page

A Constrained Layer Damper works by using a viscoelastic layer (the butyl) and a constraining layer (the aluminum) to convert mechanical energy (the vibration of a panel) into heat via the viscoelastic properties of butyl while the constraining layer helps the panel keep its shape and resist deformation. The primary way that CLD achieves this is through shear forces in the butyl layer caused by being constrained between the panel and the constraining layer while the panel is vibrating (bending). When the panel flexes and deforms, the viscoelastic layer naturally resists and wants to “snap” back into place. See Figure 1. (Click to expand)

Figure 1.

ResoNix CLD Squares should be used where you want to cut down on any structure-borne vibration and resonance. Long, flat, and thin panels, like outer door skins, door panels, quarter panels, and roof skins are the biggest offenders. Reducing structure-borne vibration helps lower the overall noise floor of the vehicle while also lowering the resonance caused by sound systems to an acceptable level. This can result in a faster decay of bass and midbass frequencies. Slow decay in these frequencies can cause “muddy” sounding bass response or can make it seem like repeated fast bass notes are blending together. See figure 2. (Click to expand)

Figure 2.

ResoNix CLD Squares are the best choice for all applications where you want to attack structure-borne vibration to reduce undesirable resonance and vibrations. We chose a butyl compound specifically designed for vibration damping and paired it to an aluminum layer thickness that is as stiff as possible, without risking weakening the adhesive bond on contoured panels.

Our detailed how-to guides on how to get the most out of our products can be found in our Reference Information & Guide section. In the meantime, please properly clean the surface of all dirt, grease, and oils before application, and use a roller to properly adhere the CLD Squares to your panel. No heat is necessary.

For any more questions about our ResoNix Lite – CLD Rectangles Lightweight Sound Deadener, or any of our other products, feel free to reach out any time!