Premium Automotive Sound Treatment Solutions
Available on backorder
ResoNix Barrier is a 3-layer, multi-function noise barrier product that is meant to fit in newer cars without the hassle and cuts down on installation time vs traditional noise barrier products such as Mass Loaded Vinyl. It is a combination of two 3mm thick layers of our Closed Cell Foam that encapsulates a layer of 1/32″ thick, 2lb per sq/ft lead sheet. ResoNix Barrier is used to block outside noise from entering a given space.
The main purpose of this product is to replace a traditional noise barrier such as mass loaded vinyl. The point of a noise barrier is to block any unwanted noise from entering the cabin of your vehicle. How it does this is very simple. Mass. Mass is the key to BLOCKING noise. No, your buddy’s favorite product with catchy marketing is not actually blocking your outside road noise.
It is also an excellent option to use for custom block-off plates on inner door skins, especially in vehicles that have 3-dimensional inner door skins in which molding an ABS plate would be difficult and time-consuming.
What makes our products better than the rest? Click here for a detailed run down on why ResoNix is the best option.
. 49″ x 28″ (9.5 Square Feet)
. 2lbs per square foot, 19lbs per sheet
. (2) 1/8″ (3.175mm) CCF Decoupler 3S outer layers (Foam Technical Specifications Found Below)
. Uncompressed thickness: 7mm +/- 0.5mm (0.28″)
. Compressed thickness: 0.04″ (1/24″, 1.06mm)
. Lead Sheet Thickness: 1/32″ (31.2mil, 0.8mm)
Prop. 65 Warning for California Residents
Warning: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.39
. Do the entire vehicle with as close to 100% coverage with no gaps to the best of your ability if you want to lower the perceived volume of road noise. The headliner will not be possible in most cars due to the weight of a noise barrier, so we suggest our ResoNix Fiber Mat 25 or ResoNix Fiber Mat 45 for the headliner location.
. Speaking of ResoNix Fiber Mat products, these are also suggested to be used IN CONJUNCTION with a noise barrier in order to absorb outside noise that makes it past the noise barrier.
. Attempting to reduce road noise by only doing a few areas (ex: just the doors) is usually a waste of time, effort, and money. The significant gains come the closer you get to 100% coverage. At minimum, do the entire floor/wheel wells, and treat the sides with a sound absorber such as ResoNix Fiber Mat products to absorb the reflected sound energy that will try to go around the noise barrier, such as ResoNix Barrier or mass loaded vinyl.
. Having an air gap between the noise barrier, regardless if ResoNix Barrier or the more difficult-to-work-with and less effective Mass Loaded Vinyl, and the panel of your vehicle is important. It is not suggested to use a noise barrier without a decoupling layer between the car and said barrier. That air gap is typically closed-cell foam, which ResoNix Barrier already features. See more in next point.
. When using ResoNix Barrier, it is not 100% needed to use more foam to achieve a better air gap, but it is never a bad idea to have more cushion for decoupling if there is still plenty of room. If ResoNix Fiber Mat can be used with it, that is even better and will also offer the added benefit of sound absorption.
. Obviously, be careful and take the proper precautions when working with this product. Once it is installed, it is of no worry, but while working with it, wear gloves and a dust mask. Remember, lead particles only absorbs into the body through mucous membranes. Do not rub eyes, touch mouth, or go digging for gold in your nose while working with this product. Clean up thoroughly afterwards.
After you have lowered structure-borne resonance and eliminated all of the panel-on-panel vibrations, the final piece to the puzzle is to reduce the outside noise entering your vehicle. This part is what I refer to as sound-proofing your vehicle. Frankly, this is the most daunting and time-consuming yet rewarding task when sound treating a car. There are two ways to eliminate sound from entering an area; blocking and absorption. Blocking will be the most effective way for a vehicle since blocking only needs mass with an air gap, while absorption needs a relatively thick open-cell or fibrous material.
As said before, to block noise, you need to have a limp, decoupled mass. The most popular choice for this in the aftermarket car audio world used to be Mass Loaded Vinyl, aka MLV. Typically, 1/8″ thick, 1 pound per square foot virgin Mass Loaded Vinyl. The new favorite among die-hard enthusiasts is encapsulated sheet lead. Applying a noise barrier to sound-proof your vehicle used to be a daunting task. 1/8″ Mass Loaded Vinyl is very stiff and has no stretch, and does not conform well to bends and curves. Our ResoNix Barrier is very flexible and holds its shape. It is also much thinner than previously prevalent noise barriers, making it the obvious choice to use in today’s vehicles. Using a noise barrier is relatively straightforward, and there are a couple of rules.
For starters, 100% coverage is highly suggested. If you are going to apply a noise barrier to your floor, do not waste your time unless you can cover every area. It’s best to do the whole car if you are going to attempt sound-proofing in our experience. Floor, trunk, doors, etc. When I tell this to people, they usually question if only doing the more general areas will be enough. Again, in our experience, and while there may be exceptions to the rule, it typically will not be worth the effort. As I said before, sound will find its way in the car.
Here is an analogy that I have lived through many times that I still use to explain… Say your annoying and inconsiderate next-door neighbor decides to cut his grass with his obnoxiously loud mower at 7 am on a Sunday while you’re trying to sleep in on your only day off. It just so happens that it was a warm night, and you slept with your window open. The second he fires up that old John Deer of his, it wakes you up. You think to yourself, “Ugh, here we go again. Better close my window and try to get back to sleep”.
What happens to your perceived volume of his mower when you close your window halfway? Nothing, right? What about when you close it 90% of the way? Still pretty much no different than with it fully open. What about when you close it pretty much all the way but don’t lock it and have a good seal? Yeah, perceived volume is lower, but not by as much as you had hoped. Your perceived volume of his mower only becomes significantly lower and tolerable when you fully seal that window shut and lock it. It’s no different when trying to sound-proof your vehicle. Take this into consideration.
You also need to decouple using a closed-cell foam or another appropriate decoupler from the substrate (the car’s body) if you want to make your efforts worth it. Without being decoupled from the car’s body, energy will pass from the car’s metal right into the noise barrier, and sound will radiate off of the vibration of the noise barrier itself. Sound will follow the path of least resistance, and it will find its way into your vehicle if you do not do an excellent job of making sure you have 100% coverage with no gaps.
ResoNix Barrier is the ideal choice for this task and has other added benefits that typical noise barriers do not have. The biggest complaint about the previous go-to, Mass Loaded Vinyl, was that it was relatively stiff, very thick, and hard to work with. Newer cars tend to have very tight tolerances behind panels, and there is just no room to fit Mass Loaded Vinyl in most new vehicles. ResoNix Barrier’s middle lead layer is extremely thin at about 1/32″ thick. It is easily moldable, as if it were a very dense aluminum foil.
For those who do not have the tools, materials, or means to make them out of an appropriate plastic can also use ResoNix Barrier in place of “block off plates” for the holes on the inner door skin. We will soon add pictures to demonstrate this, but it’s pretty simple. Just hang the piece over the inner door skin and cut around the shape of the door. While it is hung in place, make any necessary holes for the speaker, wires/plugs, and door locks/release cables. You can attach it to the inner skin at the top with our Velcro or even mechanical fasteners with large washers and seal around the edges with something as simple as aluminum HVAC tape or self-cut strips of our CCF.
Now, let’s talk about the elephant in the room. Yes, our product contains lead sheet. Lead, at least in this capacity, is not nearly as dangerous as one would typically think. Lead is usually only a concern when its dust is absorbed through a mucus membrane. It typically must be ingested or inhaled to be of any concern. Any of the typical warnings of handling lead are not a worry with ResoNix Barrier. This is because the entirety of the lead has our closed-cell foam encapsulating both faces. The only bits of lead you will be able to touch are on the very edge of the product. We still recommend using gloves and a dust mask when cutting our product, but we assure you that there is no worry considering how this product is handled and installed.
ResoNix is an automotive sound treatment company that offers top quality products which provide superior performance in their respective categories. No gimmicks, no baseless claims, no nonsense. Constrained layer dampers, sound absorbers, decouplers, and noise barriers are part of our soon to be released line-up with a focus on data-backed, solutions-basedproducts developed by enthusiasts, for enthusiasts.
50 Holt Drive, Unit 4Stony Point, NY 10980