5 reviews
The Helix P One Mk2 is a powerful mono amplifier designed for serious car audio systems. It delivers exceptional clarity and deep bass, all in a sleek, compact unit. Perfect for those who demand high-quality sound with minimal space.
1 x 1500 watts @ 1-ohm
1 x 880 watts @ 2-ohm
1 x 500 watts @ 4-ohm
$1,350.00 $1,500.00
Loads of power and tremendous stability: Our new P ONE MK2 is the ideal performance package for any subwoofer configuration. With up to 1,800 Watts RMS @ 1 Ohm, the upgrade to our powerful mono amplifier is going to rev up any woofer while always maintaining full control due to its enormous damping factor.
The P ONE MK2 is designed for more than just driving subwoofers. With its particularly wide frequency range up to 40 kHz and excellent signal-to-noise ratio as well as the extremely low THD, you can expect nothing less than High-Res sound quality, making it well suited for the use as a fullrange amplifier.
Due to the newly integrated optical digital input, an interference-free and ground-isolated signal transmission in the best possible quality all the way into the amplifier is now possible. The input receives signals up to a 96 kHz sampling rate lossless via light conductor and converts them back to the analog level via a cutting-edge 32-Bit BurrBrown D/A converter. Thus, the P ONE MK2 can be perfectly combined with one of our DSP amplifiers with optical digital output, for example the HELIX P SIX DSP ULTIMATE.
In terms of power density, the P ONE MK2 plays in a different league. No other HELIX amplifier includes so much power into such a compact package. This unique power-to-size ratio enabled by our extraordinary efficient Class D concept, which goes hand in hand with exceptionally low heat dissipation.
Thanks to its digital input, the HELIX P ONE MK2 enables a completely interference-free and ground-isolated signal transmission in best possible quality right into the amplifier. The input can handle digital audio signals up to a sampling rate of 96 kHz losslessly via fiber optics cable and converts them back to the analog level via a cutting-edge BurrBrown D/A converter.
But that’s not all– in order to get the very last bit of performance out of the amplifier and avoid even the slightest influence of its input stage, the SPDIF Direct In function can be used to route the audio signal directly and without any detours to the output stages of the amplifier.
The extremely wide frequency range up to 40 kHz enables lossless audio reproduction of High-Resolution audio content to provide the best possible sound in studio quality.
The HELIX P ONE MK2 uses for the optical input a high-class D/A signal converter of the latest generation with a native resolution of 32 Bit instead of the common 24 Bit. The result is an unprecedented precision in signal conversion that especially optimizes the sound quality at lower signal levels.
Start-Stop capability
The switched power supply of the HELIX P ONE MK2 assures operation even if the battery’s voltage drops down to 6 Volts during engine crank.
Loads of power and tremendous stability: Our new P ONE MK2 is the ideal performance package for any subwoofer configuration. With up to 1,800 Watts RMS @ 1 Ohm, the upgrade to our powerful mono amplifier is going to rev up any woofer while always maintaining full control due to its enormous damping factor.
The P ONE MK2 is designed for more than just driving subwoofers. With its particularly wide frequency range up to 40 kHz and excellent signal-to-noise ratio as well as the extremely low THD, you can expect nothing less than High-Res sound quality, making it well suited for the use as a fullrange amplifier.
Due to the newly integrated optical digital input, an interference-free and ground-isolated signal transmission in the best possible quality all the way into the amplifier is now possible. The input receives signals up to a 96 kHz sampling rate lossless via light conductor and converts them back to the analog level via a cutting-edge 32-Bit BurrBrown D/A converter. Thus, the P ONE MK2 can be perfectly combined with one of our DSP amplifiers with optical digital output, for example the HELIX P SIX DSP ULTIMATE.
In terms of power density, the P ONE MK2 plays in a different league. No other HELIX amplifier includes so much power into such a compact package. This unique power-to-size ratio enabled by our extraordinary efficient Class D concept, which goes hand in hand with exceptionally low heat dissipation.
Thanks to its digital input, the HELIX P ONE MK2 enables a completely interference-free and ground-isolated signal transmission in best possible quality right into the amplifier. The input can handle digital audio signals up to a sampling rate of 96 kHz losslessly via fiber optics cable and converts them back to the analog level via a cutting-edge BurrBrown D/A converter.
But that’s not all– in order to get the very last bit of performance out of the amplifier and avoid even the slightest influence of its input stage, the SPDIF Direct In function can be used to route the audio signal directly and without any detours to the output stages of the amplifier.
The extremely wide frequency range up to 40 kHz enables lossless audio reproduction of High-Resolution audio content to provide the best possible sound in studio quality.
The HELIX P ONE MK2 uses for the optical input a high-class D/A signal converter of the latest generation with a native resolution of 32 Bit instead of the common 24 Bit. The result is an unprecedented precision in signal conversion that especially optimizes the sound quality at lower signal levels.
Start-Stop capability
The switched power supply of the HELIX P ONE MK2 assures operation even if the battery’s voltage drops down to 6 Volts during engine crank.
HELIX products purchased through ResoNix include a one-year warranty through us. Please contact us if you experience an issue with your product or need assistance with a warranty claim.
The best DSP depends on your vehicle, factory audio system, speaker configuration, and overall system goals. Contact the ResoNix team for a vehicle-specific recommendation before placing your order.
Yes. We offer educational resources for customers who would like to learn how to tune their own DSP. For those who prefer professional assistance, ResoNix also offers remote tuning services to help properly configure and optimize the system.
The correct connection method depends on your vehicle, head unit, and factory audio system. Contact the ResoNix technical support team for a vehicle-specific integration recommendation.
The correct version depends on whether your HELIX DSP uses an SCP (Smart Control Port) or a Control Input connection. Please refer to the official HELIX CONDUCTOR compatibility chart to identify the correct version for your processor.
The Control Input version can also be connected to newer devices with an SCP input using the optional SCP-to-Control Input adapter.
The output channels on HELIX V Series and P Series DSP amplifiers cannot be bridged. However, the output channels on the HELIX AMPLIFY 206 DSP can be configured for bridged operation.
Yes. A calibrated measurement microphone is required to complete the remote tuning process accurately. ResoNix offers a complete Measurement and DSP Tuning Kit with the equipment needed for your remote tuning session.
Need further guidance or have questions? See below for more ways to get in contact and view resources.
Overall rating: 5.0 / 5 from 6 reviews.
Review topics: [].
"Fantastic amp. I have ordered 2 resonix Gus 10s that i am waiting to pair it to. Made the switch from jl audio tw3s and the jx/500. 1. I can’t wait until the subs come in to hear the clarity differance with the amp and the subs together!"
"You cant go wrong with Helix products as well as the support provided by ResoNix"
"I paired this amp with my Helix V12, and my amp rack looks amazing. It’s wild that this amp pushes out up to 1500wrms considering its small size. I upgraded from a JL JD series amplifier and i could immediately notice that my bass became a lot tighter and more defined due to this amps amazing damping factor"
"Worth the wait!"
"Will this amp run 2 Focal SUB10WM and work with a Brax DSP - Ultra High-End 12-Channel Digital Signal Processor for my highs and lows ?"
"This amplifier/DSP combo lives up to its legendary P status in the Helix lineup. It's powerful, easy to tune, even easier to wire up and it has competition grade sound quality. Helix products are truly the best in the business and their P series are second to no one."
ResoNix Fiber Mat Black Edition - Self Adhering Automotive Sound Absorber & Decoupler
$99.00
Order Now
