The Planet Waves Solderless Custom RCA Cable System is exactly what we have been using at ResoNix Sound Solutions for some time now. These allow you to cut your RCA cables to size, and install the connectors easily by simply cutting the cable, adding the head to the end, and screwing down a small flat-head set screw. Your cables can be made in less than 30 seconds. No need to break out the solder station, magnifying glass, and helping-hands and spending 10 minutes just to strip a few small wires and solder on two RCA ends. These cables are as easy as it comes.
The custom RCA cable is standard 75-ohm coaxial cable, but still has plenty of flexibility to use in automotive installations. They look clean and sleek and are not stiff and bulky like most high-end cables are. The cable comes as a side-by side pair design, so just like normal RCA’s, they act as a pair. That said, they are easy to split if you are doing custom wiring work. The Planet Waves system features side-by-side 2-channel RCA cable, Silver Male RCA Connector, Black Chrome Male RCA Connector, an RCA Y-Splitter, Silver Female RCA Connector, and the Silver Right Angle RCA Connector.
All of the connectors feature the same easy way of establishing the connection and securing the connector to the cable. It’s as simple as loosening and then tightening a flathead screw.
Solderless Custom RCA Cable System Specifications
The Planet Waves Solderless Custom RCA Cable System is exactly what we have been using at ResoNix Sound Solutions for some time now. These allow you to cut your RCA cables to size, and install the connectors easily by simply cutting the cable, adding the head to the end, and screwing down a small flat-head set screw. Your cables can be made in less than 30 seconds. No need to break out the solder station, magnifying glass, and helping-hands and spending 10 minutes just to strip a few small wires and solder on two RCA ends. These cables are as easy as it comes.
The custom RCA cable is standard 75-ohm coaxial cable, but still has plenty of flexibility to use in automotive installations. They look clean and sleek and are not stiff and bulky like most high-end cables are. The cable comes as a side-by side pair design, so just like normal RCA’s, they act as a pair. That said, they are easy to split if you are doing custom wiring work. The Planet Waves system features side-by-side 2-channel RCA cable, Silver Male RCA Connector, Black Chrome Male RCA Connector, an RCA Y-Splitter, Silver Female RCA Connector, and the Silver Right Angle RCA Connector.
All of the connectors feature the same easy way of establishing the connection and securing the connector to the cable. It’s as simple as loosening and then tightening a flathead screw.
Solderless Dual RCA Coaxial Cable
- Made in USA
- Side-by-Side design acts as a PAIR of channels
- Meets 75 ohm HD standard
- TPE Jacket
- Max Bend Radius 2.25 inches
- Sweep-tested 3GHz over 100ft with nominal db loss
- Nominal Capacitance 18.2 pF/ft / Premium oxygen-free copper
- 100% shielding with 95% tinned copper braid & tin foil shield
- CM & CL2 rated for in-wall installations
- Nitrogen-gas-injected foam PE dielectric
- Max Pulling Tension 2359 PSI
- Max Bend Radius 2.25 inches
- Sold in 1 foot increments.
Silver Male Solderless RCA Connector Ends
- Nickel Plated
- Single-Piece Design
- Small-Format
- Accepts Our Specific 75-Ohm Coaxial Cable
- Sold in pairs. An order quantity of 1 means that you will receive two end connectors.
Solderless RCA Cable Y-Adapter
- Single-Piece Design
- Small-Format
- Accepts Our Specific 75-Ohm Coaxial Cable
The Planet Waves Solderless RCA Cable Y Splitter is perfect to use in two very common situations. First, when using a single DSP channel going into a mono amplifier that requires both inputs to be used. The
second would be when using a single output out of a DSP that is feeding signal to a set of bridged amplifier channels that require both RCA inputs to be used.
Right Angle Solderless RCA Connector Ends
- Nickel Plated
- Single-Piece Design
- Small-Format
- Accepts Our Specific 75-Ohm Coaxial Cable
- SOLD IN PAIRS. An order of “1” quantity means you will receive two end connectors
Female Solderless RCA Connector Ends
- Nickel Plated
- Single-Piece Design
- Small-Format
- Accepts Our Specific 75-Ohm Coaxial Cable
- SOLD IN PAIRS. An order quantity of “1” means you will receive two end connectors.
We have been using these RCA’s exclusively at ResoNix Sound Solutions in every sound system we have installed since early 2022. To date there has had not a single failure, and any issues of induced noise from our previous RCA cable of choice, while not often, seemed to completely disappear. We have used these with many DSP’s and amplifiers from Helix, Match, Brax, Mosconi, Sinfoni, Arc Audio, JL Audio, Micro Precision, and more.
Solderless Dual Coaxial RCA Cable
The ResoNix Solderless Dual Coaxial RCA Cable is a clean, tidy, and quick solution for custom installations. Its solderless design enables fast, precise adjustments to cable lengths without the need for messy and time-consuming soldering, keeping your setup organized and hassle free. This high-quality cable also offers superior noise rejection, ensuring a clean audio signal with minimal clutter—perfect for maintaining a professional appearance in any home or car audio application.
Solderless Male RCA End Connector
The Planet Waves Solderless RCA Cable System Connectors, now only available in Silver offer a sleek, high-quality solution for precise audio connections. These connectors are designed for quick, clean, and solder-free installations, ensuring a tidy, professional setup. Their robust construction provides excellent durability and noise rejection, making them perfect for maintaining an organized appearance and superior signal integrity in any audio system.
Solderless RCA Y-Splitter Adapter
The Planet Waves Solderless RCA Cable System RCA Y Splitter offers a clean and efficient method for splitting audio signals while maintaining an organized setup. Its solder-free design enables quick, tidy installations, perfect for flexible setups with minimal clutter. Built for durability, this splitter ensures reliable performance and a professional appearance, keeping your audio system streamlined without the hassle of traditional soldered connections.
Solderless Right Angle RCA End Connector
The Planet Waves Solderless Right Angle RCA Connectors provide a smart, efficient solution for tight spaces where standard connectors can be challenging. These right-angle connectors allow for clean and tidy installations without the need for soldering, making it simple to achieve an organized setup. Built for durability and reliability, they ensure secure, precise connections while offering flexible cable routing in confined or complex layouts, maintaining a professional appearance throughout.
Solderless Female RCA End Connector
The Planet Waves Solderless Female RCA Connectors are designed for extending or joining RCA cables, crucial for creating custom audio paths or integrating additional components. These connectors offer a reliable, solder-free solution that ensures a clean and precise fit, maintaining a tidy setup. Built for durability, they provide secure connections that hold up over time, making them ideal for flexible installations while keeping your system looking professional and organized.
Sound Deadening Buyer's Guide.
For More Information:
www.resonixsoundsolutions.com
For Questions:
Email:
Phone: (269)-737-6649
Address:
What Materials Should You Use?
ResoNix Buyer's Guide