ResoNix CLD Squares Sound Deadening Material
ResoNix CLD Squares is a constrained layer damper sound deadening material comprised of butyl rubber and aluminum. It is adhered to panels of vehicles to lower structure-borne vibration and resonance to reduce noise while driving as well as to provide a better foundation in a vehicle for installing a sound system. Our ResoNix CLD Squares Sound Deadening Material can be used to treat resonance and vibration in many different applications. It is most commonly used on the metal surfaces and plastic trim panels that make up doors, trunks, hatches, rear decks, roofs, wheel wells, floors, transmission tunnels, and more!
ResoNix Mega CLD Squares Sound Deadening Material
ResoNix Mega CLD Squares may have a silly name, but their performance is downright silly as well. Similar in construction to the original ResoNix CLD Squares, the difference between the two comes down to the aluminum constraining layer. On the Super Max mega Pro CLD Squares, the aluminum is 12mil thick (12/1000 of an inch), which is 3 times thicker than the aluminum on the original ResoNix CLD Squares. This thicker aluminum allows for better performance, and better performance over a wider range of temperatures. In this kit, we advise you to use these on the outer door skins, door panels, and roof, as these are typically the most important areas, at least for sound system installations.
ResoNix Fiber Mat Automotive Sound Absorber Material
ResoNix Fiber Mat automotive sound absorbing material that is comprised of hydrophobic polyester fibers and feature an automotive-grade peel-and-stick adhesive on the back. It is used in aftermarket automotive installations to serve a few purposes. First, to absorb any incoming external noise, such as wind, tire, and road noise. Second, to decouple one panel from another. It can also act as a superior air gap/decoupling layer for a noise barrier such as ResoNix Barrier. And lastly, it is a great heat insulator. Due to the material it is comprised of, it is naturally hydrophobic and is completely mold/mildew resistant. This can be used anywhere in a vehicle without worry
ResoNix Lockout Automotive Sound Absorbing Material For Door Cavities
ResoNix Lockout is an adhesive-backed Hydrophobic Melamine sound-absorbing and thermal-insulation sheet for car doors, roofs, walls, floors, and more. Commonly used in car doors for rear-wave absorption to further improve performance and accuracy of door-mounted midbass-speakers. It also features a polyester acoustic facing that helps with absorbing midbass frequencies as well as stabilizing and protecting the Hydrophobic Melamine.
ResoNix Guardian Automotive Sound Absorbing & Noise Barrier Material For Door Cavities
ResoNix Guardian is an adhesive-backed Hydrophobic Melamine sound-absorbing and thermal-insulation sheet that has a free floating layer of Mass Loaded Vinyl that can be used for car doors, roofs, walls, floors, and more. It is most commonly used in car doors for rear-wave absorption to further improve performance and accuracy of door-mounted midbass-speakers. It also features a reinforced vinyl facing that helps with absorbing midbass frequencies as well as stabilizing and protecting the Hydrophobic Melamine.
ResoNix Barrier - The Ultimate Replacement For Mass Loaded Vinyl
ResoNix Barrier is a thin, flexible, and moldable noise barrier designed for full interior coverage to block outside broadband noise from entering the cabin. Despite being only 1/32" thick, it offers roughly twice the mass and noise-blocking performance of traditional MLV products, making it an extremely effective solution without adding unnecessary bulk or difficulty during installation.
It is most commonly installed over interior surfaces such as floors, firewalls, inner door skins, trunk areas, and more to prevent road, wind, tire, and exhaust noise from reaching the interior. ResoNix Barrier is designed to work as the final layer in a full soundproofing system and is ideal for those looking to achieve maximum isolation and refinement across the entire vehicle.
