Audi/VW OEM Harness Tape – No-Residue Interior Wire Harness Fleece Tape – Non-Woven

Fleece tapes are becoming very popular in today’s world of car audio and electronics installations. Here at ResoNix, we have used all of the popular harness tapes and have never been happy. That is, until we found the source for the exact tape that is used by VW Auto Group in Volkswagen, Audi, Porsche, Lamborghini, and Bugatti vehicles. It is used to dress and protect wire harness bundles that reside on the vehicle’s interior. The problem with many of the more popular options (Tesa) is that the adhesives are known to melt and leave sticky residue that bleeds through the tape and creates a sticky mess, both from the authentic source, and the counterfeit ones on Amazon/eBay. The tape that we sell here is the very same tape that is used by Volkswagen, Audi, Porsche, Lamborghini, Bugatti, and more of the VW Auto Group brands. If you have ever worked on one of these cars, you will know that the tape in these vehicles truly is the best you can use for this application. No nasty mess after a few months’ time, looks clean and professional, and helps prevent wires from causing rattles and vibration against your interior panels.

Where should this tape be used?

This tape should be used to dress, protect, and provide rattle resistance for any wires used in your vehicle. This is very common to use on wire bundles in amplifier racks to make everything look neat and uniform, on wire runs throughout the car to make them blend in and look OEM, and on wire bundles that you want to wrap to prevent rattles inside of your car such as in doors, rear decks, and pillar areas. It is also popular to secure panel clips to prevent them from rattling.

Remember, every car and every application is different. This is only a list of suggestions based on our experience. What may work best for your situation may be different. It is up to you to figure out what exactly needs to be done and how this product should be used.

Specifications

Each roll is 19mm wide and 25m long

Non-Woven PET Fleece Material

Acrylic-based, pressure sensitive, high-temperature resistant adhesive

For bundling aftermarket and OEM wire harnesses

No scissors needed – easily tears by hand

Suitable for sound-dampening and rattle suppression

Resistant to melting, ageing, and dry-rotting

Material feels pleasant to the touch

Excellent heat and cold resistance

Abrasion Resistance Class: Class B

Sound Damping Class: Class C

In accordance with ECE-R118 / 03